Cable

Installation cable

YMvK mb 0,6/1 kV

Appearance:
Installation cable (1.5 mm² - 240 mm²)

Usage:
Installation cable for use in all types of areas, as described in NEN 1010. The PVC outer jacket doesn't burn easily and has fire-retardant properties. The multiple-core version is usually used as an auxiliary power cable as well as in measurement and control (instrument) engineering. The cable is suitable to be permanently installed within view, but also in tubes, channels and ducts.

Properties:

The outer jacked has fire-retardant properties.
Maximum continuous conductor temperature 90 C°

Structure:
Conductor:
Composite bare electrolytic copper < 6 mm² : solid
>10 mm²: twisted
3 and 4 core cables > 35 mm² : sector shaped
other types: round
Insulation:
Vulcanized polyethylene (XLPE) colour coded
Cores:
Twisted together and padded to a round whole
Outer jacked:
Polyvinylchloride (PVC), doesn't burn easily
Jacket colour:
Grey (other colours available on request)

Note:
Also available in a halogen-free version as YMZ1Kmbzh 0.6/1 kV.

Electrical details:
Nominal voltage: 600/1000 Volt
Tested voltage: 3500 Volt

Core coulours:
2 cores: Brown, Blue
3 cores: Brown, Blue, Yellow-green
4 cores: Brown, blue, grey, yellow-green
5 cores: Bleu, brown, black, grey, yellow-green
Multiple cores:
One core is yellow-green (always in the outside layer) other cores black consecutively numbered starting from the center of te cable.

Supplied:
1.5 - 6 mm²: On rings and reels
Larger sizes: On reels

Number of cores and nominal conductor diameter* (n x mm²)	Nominal diameter across isulation (mm)	Nominal outside diameter (mm)	Minimum bending radius (mm)	Permissible current** (A)	Maximum tensile strength (N)	Approximate weight (kg/km)
2 x 1,5	2.7	9.7	49	26	280	130
2 x 2,5	3.1	10.4	52	36	320	160
2 x 4	3.5	11.3	57	49	380	210
2 x 6	4.1	12.5	75	63	470	270
2 x 10	5.5	16	96	86	770	450
2 x 6	6.5	18	108	115	970	610
3 G 1,5	2.7	10.1	51	26	310	150
3 G 2,5	3.1	10.9	55	36	360	190
3 G 4	3.5	11.9	60	49	420	240
3 G 6	4.1	13.1	79	63	515	320
3 x 10	5.5	16.8	101	75	847	540
3 x 6	6.5	19	114	100	1080	750
4 x 1,5	2.7	10.8	54	23	350	170
4 x 2,5	3.1	11.7	59	32	410	220
4 x 4	3.5	12.8	77	42	490	300
4 x 6	4.1	14.2	85	54	600	400
4 x 10	5.5	17.9	107	75	960	640
4 x 16	6.5	20.7	145	100	1260	930
4 x 25	8.2	24.9	174	127	1860	1410
4 x 35 SV	8,8/11,7	23.6	165	158	1670	1530
4 x 50 SV	9,7/13,0	26.7	187	192	2140	2030
4 x 70 SV	11,5/15,5	31	217	246	2880	2870
4 x 95 SV	13,3/18,0	34.8	244	298	3630	3900
4 x 20 SV	14,8/20,0	38.2	267	346	4378	4900
5 x 1,5	2.7	11.7	59	23	410	200
5 x 2,5	3.1	12.7	76	32	480	260
5 x 4	3.5	14	84	42	590	360
5 x 6	4.1	15.4	92	54	710	480
5 x 10	5.5	19.9	119	75	1190	800
5 x 16	6.5	22.7	159	100	1550	1140
5 x 25	8.2	27.4	192	127	2250	1730
5 x 35	8.9	29.4	206	158	2590	2230
5 x 50	10.2	33.7	236	192	3410	3010
5 x 70	12	38.8	272	246	4520	4190
5 x 95	13.7	44.3	310	298	5890	5660
5 x 120	16.5	51.9	363	346	8080	7120

*) SV = sector-shaped. The cables with yellow/green core are indicated by the letter G.
**) The permissible current applies to 1 in the open air (basic installation method E, according to table 52-B1 of NEN 1010 fifth edition), with an ambient temperature of 30 C°. See page 148 (2 - 5 live cores) and page 149 (multiple cores). Correction factors for deviating circumstances are provided in table 52-D1 (page 155) and 52-E1 (page 156). In single-core cables, the value is shown fpr 3 cables placed against each other in a triangle. In four and five-core cables, the value is shown for three live cores.