Cable

VDS installation wire

VDS installation wire

Usage:
Wiring in appliances, switch boxes and distribution units etc where installation demands supple wiring.

Properties:
Very supple because the copper conductor is composed of a large number of thin wires.

Note:
Also available in a halogen-free version, as HVDS.

Structure:
Conductor:
Flexible bare electrolytic copper
Insulation:
PVC Electrical

Details:
Nominal voltage: 450/750 Volt
Tested voltage: 2500 Volt

Colours:
1,5 and 2,5 mm²: Black, brown, blue, green-yellow, red, grey, white
4 - 35 mm²: Black, brown, blue, green-yellow and grey
≥ 50 mm²: Black (other colours available on request)

Number conductor diameter (n x mm²)	Nominal diameter across insulation (mm)	Approximate weight (kg/km)	Minimum bending radius (mm)	Maximum tensile strenght (N)	Permissible current* (A)	Conductor resistance at 20C° d.c.	Conductor resistance at 70C° 50Hz
1.5	3	20	9	75	15.5	13.3	15.9
2.5	3.6	30	11	125	21	7.98	9.54
4	4.2	45	13	200	28	4.95	5.92
6	4.8	65	14	300	36	3.3	3.95
10	6.3	115	19	500	50	1.91	2.28
16	7.4	170	22	800	68	1.21	1.45
25	9.1	260	27	1250	89	0.78	0.933
35	10.7	360	32	1750	110	0.554	0.663
50	12.7	520	51	2500	134	0.386	0.463
70	14.8	740	59	3500	171	0.272	0.327
95	17	960	68	4750	207	0.206	0.249

*) The indicated permissible current applies to 3 live wires in tube, attached to a wall (installation method No. 3, according to table 52-B2 of NEN 1010, fifth edition), at an ambient temperature of 30 C°.