Cable

Welding cable

H01N2-D

Appearance:
Welding cable (16 mm² - 120 mm²)

Usage:
In dry, damp and wet areas as well as outside, as machine and manual welding cable. Especially suitable for the secondary side of a welding transformer. Can also be used as low-voltage cable with accu batteries.

Properties:

Self-extinguishing.
Immune to greases and oils.
Well able to whitstand weather influences such as ozone.
Very flexible.

Structure:
Conductor:
Very flexible bare electrolytic copper.
Wrapping:
By one or more separating layers.
Outer jacket:
Vulcanised synthetic rubber on basis of polychloroprene (PCP).
Jacket colour:
Black (other colours available on request).

Electrical details:
Nominal voltage: 100/100 Volt
Tested voltage: 1000 Volt

Supplied:
16 - 50 mm² : On rings and reels
> 70 mm² : On reels

Number of cores and nominal conductor diameter (n x mm²)	Nominal outer diameter (mm)	Minimum bending radius* (mm)	Permissible current*** (A)	Maximum tensile strength** (N)	Approximate Weight (kg/km)
16	10.2	45	148	240	220
25	11.6	58	204	380	320
35	12.8	77	260	530	420
50	14.7	88	336	750	590
70	17	102	426	1050	790
95	19.4	116	523	1430	1060
120	21.3	128	613	1800	1290

*) With cable moving freely.
**) Static tensile power. Even when used dynamically, when higher forces often occur, the stated tensile forces schould not be exceeded.
***) In intermittent usage (such as during welding), when operating periods of 5 minutes and a switch-on factor of 60%, in accordance with NPR 3627.
****) When power is turned on continuously.